1 hj relay asct1b259e ?3.2 http://www.naisrelay.com/ new hj-relays miniature relay for wider applications features 2 contact arrangements 4 form c (for 5 a 250 v ac), 2 form c (for 7 a 250 v ac) excellent contact reliability by au plating environmentally friendly cd-free contacts coil breakdown detection function (ac type with led only) convenient screw terminal sockets with ?ger protection also available test button type available built-in diode and cr for surge suppression type available typical applications control panels power supply units molding machines machine tools welding equipment agricultural equipment of?e equipment vending machines communications equipment amusement machines ordering information ex. hj contact arrangement 2: 2 form c 4: 4 form c operation indication nil: l: without led indication with led indication nil: t: without test button with test button test button coil voltage ac dc 12, 24, 48, 100, 120, 200, 220/240 v 12, 24, 48, 110 v surge suppression nil: d: r: without with diode with cr contact surface nil: 6: without with au plating specifications contacts coil remarks * speci?ations will vary with foreign standards certi?ation ratings. * 1 measurement at same location as ?nitial breakdown voltage section * 2 detection current: 10ma * 3 excluding contact bounce time * 4 for the ac coil types, the operate/release time will differ depending on the phase. * 5 half-wave pulse of sine wave: 11ms; detection time: 10 m s * 6 half-wave pulse of sine wave: 6ms * 7 detection time: 10 m s * 8 refer to 4. conditions for operation, transport and storage mentioned in notes * 9 this value can change due to the switching frequency, environmental conditions and desired reliability level, therefore it is recommended to check this with the actual load. characteristics arrangement 2 form c 4 form c initial contact resistance, max. (by voltage drop 6 v dc 1 a) 50m w contact material au plating silver alloy (au plating type) silver alloy (without au plating type) rating (resistive load) nominal switching capacity 7a 250v ac 5a 250v ac max. switching power 1,750 va 1,250 va max. switching voltage 250 v ac max. switching current 7 a 5 a min. switching current* 9 1 v 1 ma expected life (min. operations) mechanical (at 180 cpm) 2 10 7 electrical (at 20 cpm) (resistive load) 10 5 (7a 250 v ac) 5 10 5 (5a 250 v ac) 10 5 (5a 250 v ac) 2 10 5 (3a 250 v ac) nominal operating power 0.9w 1.2v a 2 form c 4 form c max. operating speed 20 cpm (at max. rating) initial insulation resistance* 1 min. 100 m w at 500 v dc initial breakdown voltage* 2 between open contacts 1,000 vrms for 1 min. between contact sets 2,000 vrms for 1 min. between contact and coil 2,000 vrms for 1 min. operate time* 3 (at nominal voltage) max. 20 ms* 4 release time (without diode)* 3 (at nominal voltage) max. 20 ms* 4 temperature rise, max. (at 70 c) (at nominal voltage) 60 c shock resistance functional* 5 min. 100 m/s 2 {10 g} destructive* 6 min. 1,000 m/s 2 {100 g} vibration resistance functional* 7 10 to 55 hz at double amplitude of 1.0 mm destructive 10 to 55 hz at double amplitude of 1.0 mm conditions for operation, transport and storage* 8 (not freezing and condensing at low temperature) ambient temp. ?0 c to +70 c ?0 f to +158 f humidity 5 to 85% r.h. unit weight without test button approx. 31g 1.09 oz approx. 32g 1.13 oz test button approx. 34g 1.20 oz approx. 34g 1.20 oz
hj 2 types [au plating type] 1. plug-in type 2. plug-in type (with led indication) 3. plug-in type (with diode) 4. plug-in type (with diode and led indication) 5. plug-in type (with cr) 6. plug-in type (with cr and led indication) note) packing quantity: 20pcs. (inner carton), 200pcs. (outer carton) coil voltage 2 form c 4 form c part no. part no. 12v dc hj2-dc 12v-6 hj4-dc 12v-6 24v dc hj2-dc 24v-6 hj4-dc 24v-6 48v dc hj2-dc 48v-6 hj4-dc 48v-6 110v dc hj2-dc110v-6 hj4-dc110v-6 12v ac hj2-ac 12v-6 hj4-ac 12v-6 24v ac hj2-ac 24v-6 hj4-ac 24v-6 48v ac hj2-ac 48v-6 hj4-ac 48v-6 100v ac hj2-ac100v-6 hj4-ac100v-6 120v ac hj2-ac120v-6 hj4-ac120v-6 200v ac hj2-ac200v-6 hj4-ac200v-6 220/240v ac hj2-ac220/240v-6 hj4-ac220/240v-6 coil voltage 2 form c 4 form c part no. part no. 12v dc hj2-l-dc 12v-6 hj4-l-dc 12v-6 24v dc hj2-l-dc 24v-6 hj4-l-dc 24v-6 48v dc hj2-l-dc 48v-6 hj4-l-dc 48v-6 110v dc hj2-l-dc110v-6 hj4-l-dc110v-6 12v ac hj2-l-ac 12v-6 hj4-l-ac 12v-6 24v ac hj2-l-ac 24v-6 hj4-l-ac 24v-6 48v ac hj2-l-ac 48v-6 hj4-l-ac 48v-6 100v ac hj2-l-ac100v-6 hj4-l-ac100v-6 120v ac hj2-l-ac120v-6 hj4-l-ac120v-6 200v ac HJ2-L-AC200V-6 hj4-l-ac200v-6 220/240v ac hj2-l-ac220/240v-6 hj4-l-ac220/240v-6 coil voltage 2 form c 4 form c part no. part no. 12v dc hj2-dc 12v-d-6 hj4-dc 12v-d-6 24v dc hj2-dc 24v-d-6 hj4-dc 24v-d-6 48v dc hj2-dc 48v-d-6 hj4-dc 48v-d-6 110v dc hj2-dc110v-d-6 hj4-dc110v-d-6 coil voltage 2 form c 4 form c part no. part no. 12v dc hj2-l-dc 12v-d-6 hj4-l-dc 12v-d-6 24v dc hj2-l-dc 24v-d-6 hj4-l-dc 24v-d-6 48v dc hj2-l-dc 48v-d-6 hj4-l-dc 48v-d-6 110v dc hj2-l-dc110v-d-6 hj4-l-dc110v-d-6 coil voltage 2 form c 4 form c part no. part no. 100v ac hj2-ac100v-r-6 hj4-ac100v-r-6 120v ac hj2-ac120v-r-6 hj4-ac120v-r-6 200v ac hj2-ac200v-r-6 hj4-ac200v-r-6 220/240v ac hj2-ac220/240v-r-6 hj4-ac220/240v-r-6 coil voltage 2 form c 4 form c part no. part no. 100v ac hj2-l-ac100v-r-6 hj4-l-ac100v-r-6 120v ac hj2-l-ac120v-r-6 hj4-l-ac120v-r-6 200v ac hj2-l-ac200v-r-6 hj4-l-ac200v-r-6 220/240v ac hj2-l-ac220/240v-r-6 hj4-l-ac220/240v-r-6 [without au plating type] 1. plug-in type 2. plug-in type (with led indication) 3. plug-in type (with test button) 4. plug-in type (with led indication and test button) coil voltage 2 form c 4 form c part no. part no. 12v dc hj2-dc 12v hj4-dc 12v 24v dc hj2-dc 24v hj4-dc 24v 48v dc hj2-dc 48v hj4-dc 48v 110v dc hj2-dc110v hj4-dc110v 12v ac hj2-ac 12v hj4-ac 12v 24v ac hj2-ac 24v hj4-ac 24v 48v ac hj2-ac 48v hj4-ac 48v 100v ac hj2-ac100v hj4-ac100v 120v ac hj2-ac120v hj4-ac120v 200v ac hj2-ac200v hj4-ac200v 220/240v ac hj2-ac220/240v hj4-ac220/240v coil voltage 2 form c 4 form c part no. part no. 12v dc hj2-l-dc 12v hj4-l-dc 12v 24v dc hj2-l-dc 24v hj4-l-dc 24v 48v dc hj2-l-dc 48v hj4-l-dc 48v 110v dc hj2-l-dc110v hj4-l-dc110v 12v ac hj2-l-ac 12v hj4-l-ac 12v 24v ac hj2-l-ac 24v hj4-l-ac 24v 48v ac hj2-l-ac 48v hj4-l-ac 48v 100v ac hj2-l-ac100v hj4-l-ac100v 120v ac hj2-l-ac120v hj4-l-ac120v 200v ac hj2-l-ac200v hj4-l-ac200v 220/240v ac hj2-l-ac220/240v hj4-l-ac220/240v coil voltage 2 form c 4 form c part no. part no. 12v dc hj2-t-dc 12v hj4-t-dc 12v 24v dc hj2-t-dc 24v hj4-t-dc 24v 48v dc hj2-t-dc 48v hj4-t-dc 48v 110v dc hj2-t-dc110v hj4-t-dc110v 12v ac hj2-t-ac 12v hj4-t-ac 12v 24v ac hj2-t-ac 24v hj4-t-ac 24v 48v ac hj2-t-ac 48v hj4-t-ac 48v 100v ac hj2-t-ac100v hj4-t-ac100v 120v ac hj2-t-ac120v hj4-t-ac120v 200v ac hj2-t-ac200v hj4-t-ac200v 220/240v ac hj2-t-ac220/240v hj4-t-ac220/240v coil voltage 2 form c 4 form c part no. part no. 12v dc hj2-l-t-dc 12v hj4-l-t-dc 12v 24v dc hj2-l-t-dc 24v hj4-l-t-dc 24v 48v dc hj2-l-t-dc 48v hj4-l-t-dc 48v 110v dc hj2-l-t-dc110v hj4-l-t-dc110v 12v ac hj2-l-t-ac 12v hj4-l-t-ac 12v 24v ac hj2-l-t-ac 24v hj4-l-t-ac 24v 48v ac hj2-l-t-ac 48v hj4-l-t-ac 48v 100v ac hj2-l-t-ac100v hj4-l-t-ac100v 120v ac hj2-l-t-ac120v hj4-l-t-ac120v 200v ac hj2-l-t-ac200v hj4-l-t-ac200v 220/240v ac hj2-l-t-ac220/240v hj4-l-t-ac220/240v
hj 3 5. plug-in type (with diode) 6. plug-in type (with diode and led indication) 7. plug-in type (with cr) 8. plug-in type (with cr and led indication) note) packing quantity: 20pcs. (inner carton), 200pcs. (outer carton) coil voltage 2 form c 4 form c part no. part no. 12v dc hj2-dc 12v-d hj4-dc 12v-d 24v dc hj2-dc 24v-d hj4-dc 24v-d 48v dc hj2-dc 48v-d hj4-dc 48v-d 110v dc hj2-dc110v-d hj4-dc110v-d coil voltage 2 form c 4 form c part no. part no. 12v dc hj2-l-dc 12v-d hj4-l-dc 12v-d 24v dc hj2-l-dc 24v-d hj4-l-dc 24v-d 48v dc hj2-l-dc 48v-d hj4-l-dc 48v-d 110v dc hj2-l-dc110v-d hj4-l-dc110v-d coil voltage 2 form c 4 form c part no. part no. 100v ac hj2-ac100v-r hj4-ac100v-r 120v ac hj2-ac120v-r hj4-ac120v-r 200v ac hj2-ac200v-r hj4-ac200v-r 220/240v ac hj2-ac220/240v-r hj4-ac220/240v-r coil voltage 2 form c 4 form c part no. part no. 100v ac hj2-l-ac100v-r hj4-l-ac100v-r 120v ac hj2-l-ac120v-r hj4-l-ac120v-r 200v ac hj2-l-ac200v-r hj4-l-ac200v-r 220/240v ac hj2-l-ac220/240v-r hj4-l-ac220/240v-r [accessories] notes) 1. packing quantity: 10pcs. (inner carton), 100pcs. (outer carton) 2. use the retainer that is shipped with the terminal socket. 3. products conform to ul, csa and t?v, as standard. 4. in order to prevent breakage and dis?uring, the screw tightening torque for the terminal socket should be within the range o f 0.5 to 0.8 n?. 5. when attaching directly to a chassis, please use an m3.5 0.6 metric coarse screw thread, a spring washer, and a hexagonal nut. 6. for s1dx timer, use the retainer (part no. adx18012). type no. of channels item part no. terminal socket 2 channels hj2 terminal socket hj2-sfd hj2 terminal socket (finger protect type) hj2-sfd-s 2/4 channels (common) hj4 terminal socket hj4-sfd hj4 terminal socket (finger protect type) hj4-sfd-s coil data dc coils ac coils (50/60hz) coil voltage v dc pick-up voltage, v dc (max.) (at 20 c 68 f ) (initial) drop-out voltage, v dc (max.) (at 20 c 68 f ) (initial) nominal coil current, ma ( 20%) coil resistance, w (at 20 c 68 f ) ( 20%) nominal operating power, w ( 20%) max. allowable voltage, v dc (at 70 c 158 f ) 12 9.6 1.2 75 160 ( 10%) 0.9 13.2 24 19.2 2.4 37 650 ( 10%) 0.9 26.4 48 38.4 4.8 18 2,600 ( 15%) 0.9 52.8 110 88 11 10 11,000 ( 15%) 1.1 121 coil voltage v ac pick-up voltage, v ac (max.) (at 20 c 68 f ) (initial) drop-out voltage, v ac (max.) (at 20 c 68 f ) (initial) nominal coil current, ma ( 20%) nominal operating power, v a ( 20%) max. allowable voltage, v ac (at 70 c 158 f ) 50hz 60hz 50hz 60hz 12 9.6 3.6 102.9 85.4 approx. 1.2 to 1.5 approx. 1.0 to 1.3 13.2 24 19.2 7.2 54.5 45.6 26.4 48 38.4 14.4 30.7 25.9 52.8 100 80 30 11.8 10.0 110 120 96 36 12.5 10.3 132 200 160 60 6.8 5.7 220 220/240 176 72 6.8/7.8 5.6/6.4 264
hj 4 2. plug-in type 4 form c (including diode/cr) 2 14 3 5678 12 11 10 9 13 14 max. 28 1.102 max. 35 1.378 5.8 + 0.4 - 0.2 .228 + .016 - .008 0.5 .020 0.5 .020 max. 21.5 .846 2.5 .098 12.7 .500 16.8 .661 6.8 .268 6.4 .252 13.2 .520 4.4 .173 dimension: t oler ance max. 1mm .039 inch : 0.1 .004 1 to 3mm .039 to .118 inch : 0.2 .008 min. 3mm .118 inch : 0.3 .012 schematic (bottom view) standard type led ac type led dc type diode dc type cr ac type diode/led dc type cr/led ac type 4 8 12 14 13 9 5 1 10 6 2 11 7 3 1234 5678 12 11 10 9 13 14 1234 5678 12 11 10 9 14(+) (?13 12 8 6 10 2 1 9 57 4 3 11 13 (? 14 (+) 7 11 34 5 9 12 10 68 12 13 14 12 8 6 10 2 1 9 5 13 (? 7 4 3 14 (+) 11 12 10 911 14 13 7 34 5 12 68 dimensions 1. plug-in type 2 form c (including diode/cr) 14 13 912 8 14 5 12.7 .500 13.2 .520 16.8 .661 max. 28 1.102 max. 21.5 .846 max. 35 1.378 5.8 + 0.4 - 0.2 .228 + .016 - .008 0.5 .020 0.5 .020 2.5 .098 6.8 .268 6.4 .252 dimension: t oler ance max. 1mm .039 inch : 0.1 .004 1 to 3mm .039 to .118 inch : 0.2 .008 min. 3mm .118 inch : 0.3 .012 schematic (bottom view) standard type led ac type led dc type diode dc type cr ac type diode/led dc type cr/led ac type 4 8 12 14 1 5 9 13 4 8 12 14 1 5 9 13 4 8 12 1 5 9 14(+) (?13 13 (? 5 9 1 8 12 4 14 (+) 4 5 9 1 8 12 14 13 5 1 8 4 13 (? 912 14 (+) 9 13 14 12 4 5 1 8 mm inch 3. plug-in type with test button 2 form c 4 58 12 14 9 1 13 max. 28 1.102 max. 21.5 .846 max. 36 1.417 max. 38 1.496 5.8 + 0.4 - 0.2 .228 + .016 - .008 0.5 .020 0.5 .020 2.5 .098 12.7 .500 16.8 .661 6.8 .268 6.4 .252 13.2 .520 dimension: t oler ance max. 1mm .039 inch : 0.1 .004 1 to 3mm .039 to .118 inch : 0.2 .008 min. 3mm .118 inch : 0.3 .012 schematic (bottom view) standard type led ac type led dc type 4 8 12 14 1 5 9 13 4 8 12 14 1 5 9 13 4 8 12 1 5 9 14(+) (?13
hj 5 5. terminal socket hj2 terminal socket 13 14 9 12 85 41 m3 .118 terminal screw 2-m4.2 5 .165 5 mounting holes 30 1.181 22 .866 59 1 2.323 .039 6.0 0.3 .236 .012 72 1 2.835 .039 35.4 1.394 4 .157 16.5 .650 3.4 0.3 .134 .012 6 0.3 .236 .012 general tolerance: 0.5 .020 schematic (bottom view) 41 85 9 12 13 14 mounting hole dimensions 15 0.2 .591 .008 59 0.3 2.323 .012 2-m3 .118 or m4 .157 or 4.5 .177 dia. hole 4. plug-in type with test button 4 form c 34 5678 12 10 11 14 9 1 13 2 max. 28 1.102 max. 21.5 .846 max. 36 1.417 max. 38 1.496 5.8 + 0.4 - 0.2 .228 + .016 - .008 0.5 .020 0.5 .020 2.5 .098 12.7 .500 16.8 .661 6.8 .268 6.4 .252 13.2 .520 4.4 .173 dimension: t oler ance max. 1mm .039 inch : 0.1 .004 1 to 3mm .039 to .118 inch : 0.2 .008 min. 3mm .118 inch : 0.3 .012 schematic (bottom view) standard type led ac type led dc type 4 8 12 14 13 9 5 1 10 6 2 11 7 3 1234 5678 12 11 10 9 13 14 1234 5678 12 11 10 9 14(+) (?13 mm inch hj2 terminal socket (finger protect type) 13 14 9 12 85 41 m3 .118 terminal screw 2-m4.2 5 .165 5 mounting holes 59 1 2.323 .039 72 1 2.835 .039 30 1.181 16.5 .650 3.4 0.3 .134 .012 35.4 1.394 4 .157 6 0.3 .236 .012 22 .866 6.0 0.3 .236 .012 general tolerance: 0.5 .020 schematic (bottom view) 41 85 9 12 13 14 mounting hole dimensions 15 0.2 .591 .008 59 0.3 2.323 .012 2-m3 .118 or m4 .157 or 4.5 .177 dia. hole note) round type terminal is unable to attach.
hj 6 hj4 terminal socket (finger protect type) 87 3 9 1 5 6 2 11 12 14 4 10 13 lot no. 30 1.181 18 .709 3.4 0.3 .134 .012 35.4 1.394 4 .157 6 0.3 .236 .012 6.0 0.3 .236 .012 m3 .118 terminal screw 2-m4.2 5 .165 5 mounting holes 59 1 2.323 .039 72 1 2.835 .039 29 1.142 general tolerance: 0.5 .020 schematic (bottom view) 1 2 3 765 8 12 11 10 9 13 14 4 mounting hole dimensions 2-m3 .118 or m4 .157 or 4.5 .177 dia. hole 59 0.3 2.323 .012 22 0.2 .866 .008 note) round type terminal is unable to attach. hj4 terminal socket 87 3 9 1 5 6 2 11 12 14 4 10 13 lot no. 30 1.181 16.5 .650 3.4 0.3 .134 .012 35.4 0.5 1.394 .020 6 0.3 .236 .012 6.0 0.3 .236 .012 m3 .118 terminal screw 2-m4.2 5 .165 5 mounting holes 59 1 2.323 .039 72 1 2.835 .039 29 1.142 general tolerance: 0.5 .020 schematic (bottom view) 1 2 3 765 8 12 11 10 9 13 14 4 mounting hole dimensions 2-m3 .118 or m4 .157 or 4.5 .177 dia. hole 59 0.3 2.323 .012 22 0.2 .866 .008 mm inch reference data 1-(1). max. switching capacity (2 form c type) 1-(2). max. switching capacity (4 form c type) 2-(1). coil temperature rise (2 for m c/ac type) measured portion: inside the coil ambient temperature: 70 c 158 f 10 5 1 0.5 0.1 7 50 100 125 250 contact voltage, v contact current, a dc inductive load l/r=7ms ac resistive load dc resistive load ac inductive load cos =0.4 f 10 3 1 0.5 0.1 5 50 100 125 250 contact voltage, v contact current, a dc inductive load l/r=7ms dc resistive load ac inductive load cos =0.4 f ac resistive load 80 90 100 110 120 0 10 20 30 40 50 60 70 7a 0a coil applied voltage, %v temperature rise, c
hj 7 2-(2). coil temperature rise (2 form c/dc type) measured portion: inside the coil ambient temperature: 70 c 158 f 2-(3). coil temperature rise (4 form c/ac type) measured portion: inside the coil ambient temperature: 70 c 158 f 2-(4). coil temperature rise (4 form c/dc type) measured portion: inside the coil ambient temperature: 70 c 158 f 80 90 100 110 120 0 10 20 30 40 50 60 70 7a 0a coil applied voltage, %v temperature rise, c 80 90 100 110 120 0 10 20 30 40 50 60 70 5a 0a coil applied voltage, %v temperature rise, c 80 90 100 110 120 0 10 20 30 40 50 60 70 5a 0a coil applied voltage, %v temperature rise, c 3-(1). ac coil surge voltage waveform (with cr) tested sample: hj4-ac200v-r 3-(2). ac coil surge voltage waveform (without cr) tested sample: hj4-ac200v 4-(1). dc coil surge voltage waveform (without diode) 282v 80v ac200v to digital memory ac200v to digital memory approx. 630v 282v off on dc12v to digital memory approx. 260v 4-(2). dc coil surge voltage waveform (with diode) diode characteristics: reverse breakdown voltage: 1,000 v forward current: 1 a off on dc12v to digital memory reverse breakdown voltage: 1,000 v forward current: 1 a
hj notes 1. coil operating power to ensure proper operation, the voltage applied to both terminals of the coil should be 5% (at 20 c 68 f ) the rated operating voltage of the coil. also, be aware that the pick-up and drop-out voltages will ?ctu- ate depending on the ambient tempera- ture and operating conditions. 2. led indications the light of the light emitting diode is what displays operation. if voltage remains af- ter relay dropout, the led might illuminate brie?. 3. switching lifetime the switching lifetime is de?ed under the standard test condition speci?d in the jis* c 5442-1996 standard (temperature 15 to 35 c 59 to 95 f , humidity 25 to 75%). check this with the real device as it is affected by coil driving circuit, load type, activation frequency, activation phase, ambient conditions and other factors. also, be especially careful of loads such as those listed below. (1) when used for ac load-operating and the operating phase is synchronous. rocking and fusing can easily occur due to contact shifting. (2) high-frequency load-operating when high-frequency opening and clos- ing of the relay is performed with a load that causes arcs at the contacts, nitrogen and oxygen in the air is fused by the arc energy and hno 3 is formed. this can cor- rode metal materials. three countermeasures for these are list- ed here. (1) incorporate an arc-extinguishing circuit. (2) lower the operating frequency (3) lower the ambient humidity 4. conditions for operation, transport and storage 1) ambient temperature, humidity, and at- mospheric pressure during usage, trans- port, and storage of the relay: (1) temperature: ?0 to +70 c ?40 to +158 f (2) humidity: 5 to 85% rh (avoid freezing and condensation.) the humidity range varies with the tem- perature. use within the range indicated in the graph below. (3) atmospheric pressure: 86 to 106 kpa temperature and humidity range for us- age, transport, and storage: 2) condensation condensation forms when there is a sud- den change in temperature under high temperature and high humidity conditions. condensation will cause deterioration of the relay insulation. 3) freezing condensation or other moisture may freeze on the relay when the tempera- tures is lower than 0 c 32 f . this causes problems such as sticking of movable parts or operational time lags. 4) low temperature, low humidity environ- ments the plastic becomes brittle if the relay is exposed to a low temperature, low humid- ity environment for long periods of time. 5. screwing torque of pressure screw block should be less than 0.5 to 0.8n? to avoid breaking heads and bodies. 6. take care not to touch the button during normal usage to prevent unex- pected switching. test button should be used only to check the circuit con- nection. 7. operation method for test button 1) push and release 1 gently to con?m relay switching. 2) to lock to one side turn 90?counter- clockwise while pushing lock and turn 90? clockwise to release. 8. rating 9. diode characteristics 1) reverse breakdown voltage: 1,000 v 2) forward current: 1 a 10. diode and cr built-in type since the diode and cr inside the relay coil are designed to absorb the counter emf, the element may be damaged if a large surge, etc., is applied to the diode and cr. if there is the possibility of a large surge voltage from the outside, please im- plement measures to absorb it. tolerance range (avoid condensation when used at temperatures higher than 0 c 32 f ) (avoid freezing when used at temperatures lower than 0 c 32 f ) 85 5 ?0 ?0 0 +32 +70 +158 temperature, c f humidity, %r.h. stan- dard file no. ratings 2 form c 4 form c ul e43149 7a 250 v ac 7a 30v dc 5a 250 v ac 5a 30v dc t?v std. type r 2024382 7a 250 v~ (cos f =1) 7a 30v (0ms) 5a 250 v~ (cos f =1) 5a 30v (0ms) test button r 2-50006950 cr, diode au plating r 50006950 1 release push for lock for recease ... ... 3 / 19 /200 3 all rights rese r v ed, ?co p y r ight matsushita elect r ic w o r k s , ltd. go to online catalog
|
